OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U014E

Lost Communication With Multi-axis Acceleration Sensor Module B

U014E concerns a second inertial sensor module, B. Such a unit combines accelerometers and gyroscopes, measures turning rate and acceleration across and along the car, and sends the values over the bus. A second module typically appears where functions need redundant or separately mounted motion data, for instance brake-by-wire, driver assistance or rollover detection alongside the stability system. No manufacturer documents U014E publicly. Module A (U0125) is well documented: GM's 2019 brake controller for the XT4 flags a missing inertial frame after only 0.1 s and rates it Type C without MIL. A gap from module B would hit the functions that depend on it, so stability control, adaptive cruise or lane assistance may shut down with a warning while normal braking stays available. U0123 and U0124 cover single-axis sensor modules.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 4E

Possible causes

  • Connector or wiring of sensor module B corroded or broken high
  • Power or ground of module B missing medium
  • Sensor module B internally faulty low
  • Receiving controller software not matching module B low

Symptoms

  • Stability control or traction warning on
  • Driver assistance such as adaptive cruise unavailable
  • Normal braking unaffected

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U014E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication