OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U014D

Lost Communication With Mirror Control Module B

U014D concerns the second networked mirror unit. Modern mirrors carry motors for adjustment and folding, a heating element, auto-dimming glass, turn-signal repeaters or blind-spot lamps, and the electronics for them often sit on the bus as their own node. J2012 provides two such units, and the receiver, usually the body or door controller, stores U014D when unit B stops replying. No manufacturer documents U014D publicly. FCA assigns the A slot, U0213, to the interior mirror: in STAR case S2108000013 the body controller logged it after a configuration restore wrongly marked a combined rear-view mirror unit as fitted, without any customer effect. Which mirror B is therefore depends on the make, often an outside mirror. Expect that mirror's adjustment, folding or heating to fail; no MIL. U044F is invalid data from B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 4D

Possible causes

  • Broken wire in the flexing harness between body and door high
  • Fuse, power or ground of mirror module B missing medium
  • Vehicle configuration expects a mirror module that is not fitted (FCA case for module A) medium
  • Water ingress or impact damage in the mirror housing low

Symptoms

  • Mirror adjustment, folding or heating inoperative on one side
  • Blind-spot or turn-signal lamp in the mirror dark
  • Often no other effect; code found during a scan

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U014D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication