OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U014A

Lost Communication With Battery Energy Control Module C

U014A concerns a third battery energy control module, C. Hybrid and electric vehicles use such units to watch cell voltages, temperatures and state of charge and to protect the pack; distributed or modular designs give several sub-packs their own controller, which is where letters beyond A and B come in. No manufacturer documents U014A publicly. The best documented relative is U0111 for module A: in GM's 2018 hybrid tables the hybrid powertrain controller flags missing BECM messages after 500 ms, once bus communication has run for at least 5 s and the battery holds 10.2 V or more, and rates it Type B with MIL after two trips. Without data from C the system cannot judge that part of the pack, so expect reduced power, blocked charging or no ready mode. U0111, U0112 and U014C cover modules A, B and D, U044B invalid data from C.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 4A

Possible causes

  • Low-voltage supply, fuse or ground of battery module C missing high
  • Bus wiring or connector inside or at the battery pack damaged or corroded medium
  • Moisture or coolant in the pack affecting module C low
  • Battery module C internally faulty or not programmed low

Symptoms

  • Hybrid or EV system warning, reduced power
  • Charging refused or stopped
  • Vehicle may not enter ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U014A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication