OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0147

Lost Communication With Serial Data Gateway Module B

U0147 points to a second gateway, B. Large vehicle networks often use more than one routing node, for example a central gateway plus a separate unit that connects the car to the outside world. That is how FCA uses the code: in a field report on a 2014 Jeep Grand Cherokee, filed with NHTSA in investigation PE15-021, U0147 is listed as lost communication with the telematics gateway, next to an open circuit on cellular antenna 1 and U0184 for the radio. On such vehicles the code therefore concerns connected services such as emergency call or remote functions rather than driving. Other makers do not document U0147 publicly. A routing module of this kind filters and forwards messages between domains, as Bosch describes for its central gateways. U0146 and U0148 to U0150 cover gateways A and C to E, U0448 invalid data from B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 47

Possible causes

  • Power, fuse or ground of gateway B missing high
  • Bus wiring or connector to gateway B faulty medium
  • Telematics unit acting as gateway B faulty or in a fault state (FCA) medium
  • Gateway B software hangs after an update or voltage dip low

Symptoms

  • Connected services, emergency call or remote app functions unavailable
  • Modules behind gateway B not reachable with a scan tool
  • Further codes such as radio communication or antenna faults

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0147

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication