OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0141

Lost Communication With Body Control Module A

U0141 names the first of several body controllers. Unlike U0140, which stands for the single main BCM, the letter suits cars that spread body tasks over more units, and each maker decides which one is A. Mitsubishi uses U0141 for an ETACS timeout: its body controller ETACS-ECU stops sending, and keyless entry, liftgate, airbag, brake and steering units log the loss; bulletin TSB-19-42B-003 revised the procedure for Outlander, Lancer and Outlander Sport up to 2019. FCA labels the module IPM (BCM) or, in older airbag lists, the front control or totally integrated power module; on the 2021 Chrysler 300 a PCM flash cures a MIL that comes with it. On the 2023-24 Audi e-tron the gateway stores U014100 when the ignition will not switch on, cured by a software update of the comfort control unit J393.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 41

Possible causes

  • Power, fuse or ground of body module A missing high
  • Software of module A or of the listener needs updating (Audi J393, FCA PCM) medium
  • Bus wire or connector to module A damaged or loose medium
  • Body module A internally faulty low

Symptoms

  • Keyless entry, liftgate or other body functions inoperative
  • Ignition cannot be switched on (Audi e-tron case)
  • MIL or several warning lamps on
  • Code stored in many modules at once

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0141

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication