U013D
Lost Communication With Vacuum Sensor A
U013D stands for lost communication with vacuum sensor A, a networked sensor that reports the vacuum in the brake booster or a vacuum reservoir. Engines with little manifold vacuum, such as turbocharged direct-injection units, and hybrids use this value to switch on an electric vacuum pump or to throttle the engine so the brake assist stays sufficient. No manufacturer documents U013D in public; GM's 2019 ECM tables show the analog form of this sensor with codes P0556 to P0558, classified as Type B. CARB demands a separate code for lost communication of digital inputs. Sensor B uses U013E, invalid data from sensor A U043E. Possible effects: brake assist warning, start-stop disabled, MIL depending on the manufacturer.
Possible causes
- Loose or corroded connector at the vacuum sensor on the booster high
- Supply, ground or bus wiring of the sensor faulty medium
- Vacuum sensor A internally faulty low
Symptoms
- Brake booster or brake assist warning
- Electric vacuum pump runs constantly or start-stop disabled
- MIL on depending on the manufacturer
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U013D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.