OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0134

Lost Communication With Power Steering Control Module - Rear

U0134 is stored when a controller loses contact with the rear power steering control module, the actuator unit of a rear-wheel or four-wheel steering system. Such systems turn the rear wheels by a few degrees, opposite to the front ones at low speed for a smaller turning circle and in the same direction at higher speed for calmer lane changes. No manufacturer explains U0134 in a publicly available document. CARB obliges manufacturers to detect missing communication from digital inputs as a separate fault, while electronic steering only falls under OBD monitoring where other diagnostics depend on it, so the code is mainly a chassis matter. U0131 belongs to the front steering, U0435 to invalid rear-steer data. Usually the rear wheels stay centred.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 34

Possible causes

  • Fuse, supply, ground or CAN wiring of the rear steering module faulty high
  • Corroded or wet connector at the rear axle actuator medium
  • Rear steering control module internally faulty low

Symptoms

  • Steering system warning lamp or message
  • Larger turning circle, rear wheels no longer steer

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0134

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication