OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0132

Lost Communication With Suspension Control Module A

U0132 is set when a module stops receiving suspension control module A, the controller for air springs, ride height or damping. GM names the K5 automatic level control module of 2021 Escalade, Tahoe, Suburban and Yukon with air suspension: it goes silent, a leveling or headlamp service message comes up, and removing two fuses for a few minutes revives it (PIT5795). GM's 2025 EBCM flags missing level-control frames after 250 ms as Type C without MIL. FCA links U0132 on Ram 2500/3500 with rear auto-level air suspension to ASCM software and a lit MIL (TSB 08-175-21). Audi Q5/Q7 and Bentley store U013200 in the gateway, cured by a J775 update or a fuse reset. Module B is U0139. Leveling may stop.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 32

Possible causes

  • Suspension module locked up, recovers after a power cycle (GM PIT5795, Bentley) high
  • Suspension module software, fixed by an update (FCA Ram, Audi J775) medium
  • Fuse, supply or CAN wiring of the suspension module faulty medium
  • Suspension control module internally failed low

Symptoms

  • Air suspension or leveling warning in the cluster
  • Ride height control or headlamp leveling inoperative
  • MIL on some vehicles (e.g. Ram heavy duty)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0132

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication