U012F
Lost Communication With Generator B Control Module
U012F is reserved for vehicles with a second generator, labelled B, whose regulator or control electronics talk to the powertrain or hybrid controller over a bus. That can be a second alternator on heavy-duty trucks or a further motor-generator in a hybrid drive. No manufacturer explains U012F in an open document; the closest documented case is the A unit under U012D, where Ford's smart alternator hangs on a LIN line and loses contact through wet connectors or chafed wires. CARB's network monitoring rules apply in the same way. If generator B goes quiet, the controller can no longer set its output, so charging power drops and the battery or high-voltage system may run short. U0120 covers a starter generator.
Possible causes
- Wet or corroded connector in the bus line to generator B high
- Fuse, power or ground of the generator B electronics missing medium
- Bus wire chafed against engine or bracket medium
- Generator B regulator or control module faulty low
Symptoms
- Charging system warning
- Battery voltage falls during driving
- Hybrid system warning or reduced electric drive on hybrids
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U012F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.