U012C
Lost Communication With Active Vibration Control Module
U012C covers the controller that drives active engine mounts or inertial shakers to cancel engine vibration, for example in cars that switch off cylinders. Such a unit needs engine speed and load from the network to generate a counter-phase force; a Honda patent (US 10360893) describes a separate AVC control unit with actuators and acceleration sensors that adapts its cancelling output to engine rotation. No manufacturer publishes a description of U012C itself, so the setting rule is the general one from CARB's network monitoring: the receiving controller stores the code when expected frames stay away. Engine mount actuator wiring has its own codes, P0A14 and following; invalid data is U042D. Expect more cabin vibration, usually no MIL.
Possible causes
- Power or ground of the vibration control unit missing high
- Bus wire or connector damaged near engine or subframe medium
- Active vibration control module internally faulty low
Symptoms
- Noticeable engine vibration at idle or in cylinder deactivation mode
- Humming or booming noise in the cabin
- Fuel saving mode may stay disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U012C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.