U012B
Lost Communication With Chassis Control Module B
U012B is the counterpart to U012A for a second chassis controller, labelled B. No manufacturer documents U012B in an openly available source, so its exact job (air suspension, damping, steering or another chassis task) depends on the vehicle. Logic follows the usual network rule that CARB requires and GM spells out for module A: a receiving controller expects a periodic message, and if it stays away for a calibrated time while supply and ignition are valid, the receiver stores the code for the silent partner. GM's tables for U012A list Type B on engine nodes and Type C on the transmission, so the warning lamp behaviour is maker specific. Invalid data from module B is U042C.
Possible causes
- Fuse, power or ground of chassis module B interrupted high
- Damaged bus line or connector to module B medium
- Chassis module B internally faulty or not programmed low
Symptoms
- Chassis warning message in the cluster
- Functions handled by module B (e.g. suspension) unavailable
- Scan tool cannot reach module B
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U012B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.