OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U012A

Lost Communication With Chassis Control Module A

U012A reports that chassis control module A is silent. The unit behind the letter A varies between brands; GM uses the code in several engine and transmission tables. The 2016 ECM for the L20 engine waits for message $4DB and logs a missing frame as Type B, so the MIL comes after two trips; the 2020 ten-speed transmission controller watches frame $1F7 from the integrated chassis control module (ICCM) and treats the loss as emissions-neutral Type C. GM's 2015 engine table even uses U012A for a lost fuel pump control module, more than 0.5 s without a message, also Type B. U012B is the B module, U042B invalid data from module A. Effects range from chassis warnings to engine trouble.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 2A

Possible causes

  • Power, ground or fuse of chassis module A missing high
  • Bus wiring or connector to the module damaged medium
  • Voltage dip leaving a stored code medium
  • Chassis module A internally faulty low

Symptoms

  • MIL on in vehicles where the engine controller logs it
  • Chassis functions controlled by module A unavailable
  • Hard start or stalling if the module drives the fuel pump

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U012A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication