OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U011E

Lost Communication With Throttle Actuator B Control Module

U011E reports that the controller for throttle actuator B has gone silent. Most engines use a single electronic throttle whose motor the engine controller drives itself; a separately housed throttle controller is covered by U0107. SAE reserves B for a second actuator with its own bus-connected driver, but which production engines use one is not documented, and no manufacturer describes U011E publicly. CARB's rule for separate lack-of-communication codes is the formal basis. If control of an electronic throttle is lost, springs return the plate to a fixed limp-home opening that allows only slow driving. Software incompatibility with a throttle controller is U0308, invalid data U0408. Expect MIL, reduced power and possibly an idle-only engine.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 1E

Possible causes

  • Throttle B controller without power or ground high
  • Damaged CAN wiring or connector to the controller medium
  • Throttle actuator B control module internally faulty low

Symptoms

  • MIL on
  • Limp-home mode with reduced power
  • Poor throttle response or idle only

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U011E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication