OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U011C

Lost Communication With Rocker Arm Control Module B

U011C is the partner of U011B for rocker arm control module B, for example the controller of the second cylinder bank or of a second group of switchable rocker arms where the task is split across two units. The engine controller expects cyclic status from it, such as the confirmed lock state per cylinder, and records U011C once those frames fail to arrive. No manufacturer documents this code publicly, and it remains open which production engines use a separate B module at all; the entry relies on CARB's call for separate lack-of-communication codes and its monitoring rules for valve lift and control. Invalid data from this module is U041D. Without the B unit the affected cylinders usually stay in full-lift mode: MIL, possibly uneven running and more fuel.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 1C

Possible causes

  • Module B without power or ground high
  • Contaminated or loose connector at the second cylinder head medium
  • Open or shorted CAN lines to module B medium
  • Rocker arm control module B internally faulty low

Symptoms

  • MIL on
  • Affected cylinders remain in full-lift mode
  • Uneven running or higher consumption

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U011C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication