OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U011B

Lost Communication With Rocker Arm Control Module A

U011B covers the first rocker arm control module. On overhead-cam engines that shut cylinders down or change valve lift, a solenoid routes engine oil to unhook a pin coupling two rocker arms; the cam-driven arm then moves on its own and the valve stays shut. Where a maker hands this switching to a dedicated controller, the engine controller sets U011B when that unit's messages stop. No manufacturer documents the code publicly. CARB requires lost digital communication to be coded separately and also obliges makers to supervise systems that vary valve timing or lift. U011C is the second module, U041C stands for invalid data from this one. Expect the MIL, switching of valve lift or cylinder deactivation locked out and higher fuel use.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 1B

Possible causes

  • Rocker arm module without power or ground high
  • Oil-soaked or heat-damaged connector on the cylinder head medium
  • Damaged CAN wiring between module and engine controller medium
  • Rocker arm control module internally faulty low

Symptoms

  • MIL on
  • Cylinder deactivation or valve lift switching inactive
  • Higher fuel consumption

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U011B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication