OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0115

Lost Communication With ECM/PCM B

U0115 is set when a second engine or powertrain controller, ECM/PCM B, vanishes from the bus; U0100 belongs to unit A. What B stands for depends on the maker: GM's Saab 9-5 and 9-4X lists call it ECM 2, Mercedes-Benz assigns U011500 to its drivetrain control unit. In the 2021 S 580, the 48 V integrated starter alternator logged U0115 with U0168 because of its own software; the MIL went out after three drive cycles, release 20.B cured it (LI15.40-P-073663). The DC/DC converter of the EQB and electric G-Class records it after wake-up faults (LI54.10-P-079533). Mazda (09-027-26) sees it on the CX-90/CX-70 PHEV, together with P0AB9, as a cold-weather no-READY caused by moisture at luggage-area connector 3002-411.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 15

Possible causes

  • Software fault in the reporting or the B controller (updates released) high
  • Water ingress or corroded terminals on the bus or relay connectors medium
  • Controller B not powered or not woken up in time medium
  • ECM/PCM B internally faulty low

Symptoms

  • MIL or engine/drive system warning
  • No start or no READY on hybrids
  • Often no driveability complaint when the code is software-related

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0115

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication