U010F
Lost Communication With Air Conditioning Control Module
U010F is logged when the air conditioning control module stops reporting. J2012 keeps it apart from the HVAC control module (U0164): the A/C unit governs the refrigerant side, such as compressor clutch or electric compressor drive and pressures, while the HVAC module handles blower, flaps and temperature choice. Saab's 2011 code lists for the 9-5 and 9-4x carry U010F 00 next to U0164 00, which documents GM/Saab use. Neither list gives a threshold; Saab's general U0100–U02FF procedure applies, a missing state-of-health message at 9–16 V. The compressor then usually stays off, so cooling and demisting are lost; the engine is not affected and no MIL is expected. U040A covers invalid data from the same module.
Possible causes
- A/C module without power or ground (fuse, connector) high
- Damaged bus lines to the A/C module medium
- Condensate or water at module or connector medium
- A/C module internally faulty low
Symptoms
- Air conditioning does not cool
- Windows fog up, demisting weak
- No MIL
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U010F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/fault-diagnosis-diagnostic-trouble-codes/control-module-u-code-list
- saabwisonline.com/9-4x/2011/3-electrical-system/bus-and-diagnostics-communication/fault-diagnosis-diagnostic-trouble-codes/control-module-u-code-list
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/fault-diagnosis-diagnostic-trouble-codes/dtc-u0100-u02ff
- WikipediaAutomotive air conditioning