OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U010E

Lost Communication With Reductant Control Module

U010E concerns the reductant control module that runs dosing, pump and heaters of a diesel SCR system with urea solution (DEF/AdBlue). GM's 2017 small-diesel table expects frame $092 and several $4Cx/$4Ex frames on bus B and, after 10 s of silence, records a Type A fault with MIL on the first trip, unless bus B is off (U0074). GM's 2025 central gateway judges its DEF controller differently: messages overdue by 2.5 periods for 6.5 s with battery above 7 V give Type B. For Ram 3500–5500 cab chassis with the 6.7 L Cummins (2012), bulletin 18-012-13 brought ECM software against needless MIL with U010E. Without the module no reductant is dosed, NOx rises and the inducement logic may cap speed. U040F covers invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 0E

Possible causes

  • Reductant module without power or ground (fuse, relay) high
  • Corroded or wet connector at the tank-mounted module medium
  • Damaged bus lines along the frame to the module medium
  • Engine controller software setting the code falsely low

Symptoms

  • MIL and DEF/AdBlue warning
  • Countdown to speed limit or restart block
  • Further SCR codes such as P20EE

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U010E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication