OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U010D

Lost Communication With Turbocharger/Supercharger Control Module B

U010D is the counterpart of U010C for a second charger control module, B. It applies to engines with two independently actuated chargers, such as sequential or twin turbo layouts, or a turbo plus an electronically controlled supercharger. Every node that expects cyclic data from module B logs the code once that traffic stops. No manufacturer documents U010D publicly and the NHTSA bulletin index lists it nowhere, so thresholds are unknown; GM's handling of module A (10 s, Type B, two trips) shows the usual pattern. With one charger uncontrolled, the engine controller typically caps boost and torque and may light the MIL, because boost control is emission-relevant under CARB. U040E covers invalid data from module B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 0D

Possible causes

  • Charger module B without power or ground high
  • Heat-damaged wiring or connector at the second charger medium
  • Charger actuator/module B internally faulty medium

Symptoms

  • MIL on
  • Reduced power, second charger not used
  • Module B not reachable with a scan tool

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U010D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication