U010B
Lost Communication With Exhaust Gas Recirculation Control Module B
U010B names the second exhaust gas recirculation control module, B. Its existence implies an engine with two separately controlled EGR units, for example a high- and a low-pressure loop on a diesel or one unit per cylinder bank; which one is B is the maker's choice. The code itself only says that a node expecting periodic messages from module B no longer receives them. Neither a manufacturer document nor any entry in the NHTSA bulletin index names U010B. Diagnosis therefore follows the generic path: supply, ground and bus lines of module B first, then the module. If only B is silent while A (U010A) still talks, the fault sits in B's branch. Invalid data from B is U040C; CARB's EGR monitoring makes the code emission-relevant.
Possible causes
- EGR module B without power or ground high
- Open or chafed bus branch to module B medium
- Loose or heat-damaged connector at module B medium
- EGR module B internally faulty low
Symptoms
- MIL on
- Second EGR path inactive, possible NOx increase
- Module B not reachable with a scan tool
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U010B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.