OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0107

Lost Communication With Throttle Actuator A Control Module

U0107 targets a stand-alone throttle actuator control (TAC) module, as used before throttle control moved into the engine controller. In GM's 2004 and 2005 truck tables (4.3–6.0 L and 8.1 L) the PCM and TAC module traded data over a dedicated serial link; the PCM declared a gap after 18.75 ms and the TAC module after 25 ms. Each missing or corrupt message added 10 to a counter, each valid one took 1 away, and 500 ms without valid data produced a Type A code with MIL on the first trip. Without this link the electronic throttle is no longer cross-checked, so the engine usually runs with restricted power. U0408 covers invalid TAC data and U0308 a software mismatch.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 07

Possible causes

  • Open, shorted or chafed serial data lines between PCM and TAC module high
  • TAC module supply or ground faulty medium
  • Corroded connector at the TAC module medium
  • TAC module internally faulty low

Symptoms

  • MIL on
  • Reduced engine power, throttle barely opens
  • Idle unstable or engine stalls

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0107

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication