U009D
Vehicle Communication Bus J
U009D covers Vehicle Communication Bus J in general, the tenth letter, and like I it has only this code and a performance code in the list, so open or shorted lines also end up here. No public bulletin names the network behind J, and no manufacturer documents U009D publicly. CARB's requirement for a separate code when a digital input stops communicating is the regulatory basis. Faults that appear after parking deserve attention. Nissan points out that with the key off and the network asleep both CAN wires read 0 V, so voltages must be measured with the bus awake. NXP notes that a single frame at a 500 kbit/s rate may not be enough to wake its TJA1043 reliably, and asks for two in a row. A module that wakes late can therefore look like a bus fault.
Possible causes
- Open or shorted wire on Bus J high
- Module not waking or waking late medium
- Supply or ground fault at a Bus J module medium
Symptoms
- Functions of Bus J modules missing after start
- Lost-communication codes, sometimes only after parking
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U009D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.