U009C
Vehicle Communication Bus I Performance
U009C reports that Vehicle Communication Bus I carries traffic, but not at the quality the module expects. U009C has not been documented in public by any manufacturer. The causes lie in signal integrity rather than a hard fault. Texas Instruments ties the possible bus length to the data rate, roughly 40 m when running at 1 Mbit/s and 100 m at half that rate, and names cable bandwidth and intersymbol interference as the limits; repairs with long added wire or untwisted cable eat into that margin. TI cites the standard's twisted pair with 120 ohms impedance. CAN detects such distortion as protocol errors: Wikipedia explains that after five identical bits the sender adds one of the inverse value, and six identical bits in a row count as an error, prompting a repeat.
Possible causes
- Repair with untwisted or overly long wire medium
- Loose contact causing bit errors high
- Missing or wrong termination low
Symptoms
- Brief dropouts of functions on Bus I
- Delayed reactions of displays or controls
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U009C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.