U009A
Vehicle Communication Bus H (-) Shorted to Bus H (+)
U009A means the two wires of Vehicle Communication Bus H touch each other, on a CAN CAN-Low against CAN-High. No manufacturer documentation of U009A is public. On a high-speed CAN this ends all traffic; onsemi's bench node could not send and drew about 47 mA against roughly 65 mA on a healthy bus. A fault-tolerant low-speed CAN can live with it: the TJA1055 from NXP initially reads the bus as constantly dominant, and only once a time-out has run does it disable its CANL driver and carry on single-wire, returning to differential operation once the wires are separated. So on some cars U009A comes with a dead network, on others only with a stored code. Separating harness sections while measuring resistance between the wires narrows down the spot.
Possible causes
- Bus wires crushed together high
- Wet or corroded splice joining both wires medium
- Internal short in a module's transceiver low
Symptoms
- On high-speed CAN: complete loss of Bus H functions
- Lost-communication codes for several modules
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U009A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.