U0097
Vehicle Communication Bus H (-) Open
U0097 points to an open (-) wire on Vehicle Communication Bus H, CAN-Low if Bus H is a CAN. The code is absent from public manufacturer documents. Effects vary: NXP's fault-tolerant TJA1055 keeps receiving differentially with a broken CANL, while on a high-speed CAN the nodes beyond the break lose part of their signal. Sleep behaviour matters too; NXP designed the wake detection of its TJA1043 so that a broken CAN-Low does not wake the network while it is going to sleep. A car with U0097 should still be checked for battery drain. To locate the break, Nissan advises splitting a harness with inline connectors into sections, testing one at a time and fitting a 120-ohm resistor in place of the terminating module.
Possible causes
- Broken (-) wire in the harness high
- Spread or bent terminal losing contact medium
- Poor earlier repair or splice in the (-) wire low
Symptoms
- Modules beyond the break respond only sometimes
- Code with little effect on fault-tolerant layouts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0097
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.