U0094
Vehicle Communication Bus H (+) Open
U0094 reports that the (+) wire of Bus H is interrupted, CAN-High where Bus H is a CAN. No manufacturer documents U0094 publicly. How much the break matters depends on the kind of CAN. A fault-tolerant low-speed CAN up to 125 kBd, built with transceivers such as NXP's TJA1055, keeps receiving differentially with a broken CANH wire, and the chip's error output toggles only if the gap separates the sending node from the listening one, so the module may see the fault only now and then. A high-speed CAN loses the far nodes. For locating it, Nissan's chart separates a break in the main line from one in a branch to a single module, judged by the resistance and voltages measured at the diagnostic socket.
Possible causes
- Broken (+) wire, e.g. at a hinge or flexing harness section high
- Terminal pushed out of a connector medium
- Corroded splice with high resistance low
Symptoms
- Single modules on Bus H not reachable
- Fault appears intermittently or with movement
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0094
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.