U0093
Vehicle Communication Bus H Performance
U0093 says Vehicle Communication Bus H works, but with too many errors or too much delay. U0093 appears in no public manufacturer document. Unlike the wire codes U0094 to U009A, nothing is open or shorted; the signals are merely unreliable. A frequent background is a ground offset between modules. Texas Instruments describes the potential difference between the grounds of sender and receiver as common-mode voltage, with ISO 11898 requiring tolerance from -2 to +7 V, and lists erratic resets, lock-ups and corrupted data as results when it is exceeded. In a car this happens with loose or corroded ground points. On a CAN, each corrupted frame triggers an error frame and a repeat, which costs bandwidth long before any node is shut off.
Possible causes
- Loose or corroded ground point of a Bus H module high
- Loose terminal causing short interruptions medium
- Interference coupled in from nearby loads or retrofitted devices low
Symptoms
- Functions on Bus H drop out briefly and recover
- Modules restart or freeze sporadically
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0093
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.