U0092
Vehicle Communication Bus H
U0092 stands for Vehicle Communication Bus H as a whole, the eighth network letter in SAE's list. Which network a carmaker files under H is not stated in any public bulletin or OBD table, and no manufacturer documents U0092 itself; the service data of the specific model has to tell. The code reflects CARB's rule that a digital input which stops communicating must be detected and get its own fault code. U0092 does not narrow the fault down; U0093 stands for degraded traffic, U0094 to U009A for single-wire faults and U007A for a module that went bus off. Supply problems can look the same: Nissan observes that below about 10 V modules drop off the bus one by one at different voltages, and that a few main fuses feed many modules at once. Check battery and feeds first.
Possible causes
- Weak battery or voltage drop so modules fall off the bus medium
- Blown main fuse or bad feed supplying several Bus H modules medium
- Wiring or connector fault on Bus H high
Symptoms
- Several functions handled by Bus H modules fail together
- Problems worse at cranking or with a low battery
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0092
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.