OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U008A

Vehicle Communication Bus G Performance

U008A means Vehicle Communication Bus G still carries traffic, but not cleanly. No manufacturer documents U008A publicly. If Bus G is a CAN, every node counts its own transmit and receive errors; Wikipedia describes that a node turns error passive once a counter exceeds 127 and leaves the bus only after the transmit count passes 255, which is the bus-off case coded as U0079. U008A covers the range below that, with repeated frames, delays and occasional corrupted data. Signal quality is a frequent reason: Texas Instruments recommends unterminated stubs of no more than about 0.3 m on high-speed CAN, because reflections in longer branches, such as from tapped-in accessories, can distort bits at the sampling point. CARB requires communication errors to be detected alongside total loss.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 8A

Possible causes

  • Aftermarket device tapped into Bus G with a long branch medium
  • Loose or corroded contact in a Bus G connector high
  • Termination of Bus G missing or out of tolerance low

Symptoms

  • Short dropouts of functions on Bus G
  • Messages that appear briefly and vanish

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U008A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication