U0089
Vehicle Communication Bus G
U0089 covers Vehicle Communication Bus G as a whole, the seventh of the network letters that SAE leaves for manufacturers to assign. No manufacturer documents U0089 publicly, and neither a service bulletin nor an OBD table names a network for the letter G, so the bus behind it can only be identified from the service information for the specific car. Such umbrella codes rest on CARB's demand that a digital input which stops communicating be recognised and given its own fault code. The code says only that the module has a problem with Bus G as a whole; the neighbouring codes narrow it down: U008A for unreliable traffic, U008B to U0091 for single-wire faults, U0079 for a module that switched itself off the bus. What the driver notices depends on which systems share Bus G.
Possible causes
- Damaged wiring or connector on Bus G high
- Supply or ground fault of a module on Bus G medium
- Internal fault of a module disturbing the bus low
Symptoms
- Functions handled by Bus G modules fail or act erratically
- Several modules hold communication codes
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0089
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.