U0088
Vehicle Communication Bus F (-) Shorted to Bus F (+)
With U0088 the two conductors of Vehicle Communication Bus F are bridged to each other. Signalling on both FlexRay and CAN rests on the difference between the wires, so with them joined there is none: a FlexRay receiver such as NXP's TJA1081B sees a difference below its activity threshold and treats the line as idle, while every sending node reads back something other than what it transmits and sets its bus error flag. On a single channel this ends all exchange on Bus F, which is why modules elsewhere then log the silent partners as lost. Volvo names a short between CAN-High and CAN-Low as one cause of U008088 on its truck datalink 7. For CAN, onsemi's bench tests likewise show a bridged pair stopping all traffic. Isolate sections by unplugging connectors while measuring between the wires.
Possible causes
- Bus F pair crushed so both wires touch high
- Water or corrosion bridging both wires in a splice or connector medium
- Transceiver with an internal short between its bus pins low
Symptoms
- Complete loss of the functions served by Bus F
- Lost-communication codes for several modules
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0088
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.