U0087
Vehicle Communication Bus F (-) High
U0087 stands for a (-) wire on Vehicle Communication Bus F pulled too high, most often through contact with battery voltage. If Bus F is the FlexRay of an Audi A6/A7, the wire is bus minus (BM); held above BP, it creates a constant negative difference that receivers treat as DATA_0, so the channel looks permanently busy and no node can place a frame. NXP's TJA1081B tolerates such a short on its bus pins without damage. On a CAN, CAN-Low at supply voltage cannot be pulled down for a dominant bit; onsemi and NXP both describe the bus as blocked. Volvo includes a short of CAN-Low to power among the causes of its truck code U008088. No manufacturer documents U0087 itself. With ignition on, a (-) wire near battery voltage confirms the fault.
Possible causes
- (-) wire of Bus F shorted to a battery or ignition feed high
- Moisture in a connector linking the (-) pin to a supply medium
- Internally shorted transceiver in one module low
Symptoms
- All functions on Bus F fail together
- Warning lamps and messages from several systems
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0087
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.