OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0083

Vehicle Communication Bus F (+) Low

U0083 means the (+) line of Vehicle Communication Bus F is held too low, normally by a short to ground. On FlexRay, which Audi links to Bus F, the line is bus plus (BP). NXP builds its TJA1081B to survive such a short and lists short-circuit detection on the bus lines among its diagnostic features; with BP at ground instead of its idle level of roughly half the 5 V supply, the difference to BM no longer swings the way the receivers expect. If Bus F is a CAN, a grounded CAN-High stops dominant bits, which onsemi found blocks the bus. Among Volvo's typical triggers for the truck code U008088 is CAN-High grounded. No manufacturer documents U0083 itself. With the battery disconnected, measure the (+) wire to chassis.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 83

Possible causes

  • (+) wire of Bus F chafed through to body metal high
  • Harness pinched by a trim panel or bracket medium
  • Faulty transceiver pulling the (+) line to ground low

Symptoms

  • Several functions on Bus F fail at once
  • Many lost-communication codes in other modules

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0083

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication