OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0081

Vehicle Communication Bus F Performance

U0081 marks Vehicle Communication Bus F as working but unreliable: frames arrive damaged, late or not at all from time to time, while the network as a whole stays up. No manufacturer documents U0081 publicly. Jaguar Land Rover shows how close the boundary is by recording invalid serial data on Bus F as failure type 81 of U0080 instead. Where Bus F is FlexRay, as on Audi's A6/A7 link to the transmission, each transceiver can check its own output: NXP's TJA1081B raises a bus error flag whenever the level it reads back on the BP/BM pair disagrees with the data it is sending, which happens with collisions, interference or a damaged pair. CARB asks for communication errors on digital signals to be detected, not only total loss. Intermittent contacts and moisture are the usual culprits.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 81

Possible causes

  • Loose or corroded contact in a Bus F connector high
  • Twisted pair of Bus F damaged or untwisted near a repair medium
  • Electrical interference from an aftermarket device low
  • Module software that handles bus timing incorrectly low

Symptoms

  • Functions on Bus F drop out briefly and return
  • Several modules store communication codes at the same time

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0081

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication