U007F
Control Module Communication Bus M Off
U007F closes the range of bus-off codes that SAE runs from U0073 for Bus A to Bus M; the next code, U0080, already belongs to the general Bus F faults. No manufacturer publishes a use, and which physical network carries the letter M has to be read from the maker's service data. CARB only demands that missing digital communication be detected and stored separately, not how buses are named. One detail helps narrow the cause: according to Wikipedia, a sender whose frames simply go unacknowledged, for example because it is alone on the bus, keeps repeating them and reaches error passive, not bus off. U007F thus points to active disturbance, such as a shorted line or a node that cannot drive the bus. Begin at the storing module's supply, ground and connector.
Possible causes
- Shorted line on Bus M medium
- A node unable to drive the bus, e.g. defective transceiver medium
- Poor supply, ground or connector contact at the storing module low
Symptoms
- Functions of the storing module unavailable
- Several warning messages or none, depending on the module
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U007F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.