U0069
Vehicle Communication Bus E (-) Open
U0069 concerns a severed (-) line on Vehicle Communication Bus E, CAN-Low where Bus E is a CAN such as the infotainment CAN Volkswagen Group gateways supervise. Beyond splitting the network, the break matters for signal quality: Texas Instruments points out that stubs on a high-speed CAN are unterminated and should stay short, around 0.3 m, because reflections in them must die out ahead of the sampling point. A break that isolates a terminating node turns the remaining wire into exactly such an open end. Transceivers do not detect line interruptions themselves (NXP), so a module infers the fault from missing acknowledgements or time-outs. No manufacturer documents U0069 publicly. Check CAN-Low continuity and connector latching, especially behind the dashboard.
Possible causes
- (-) wire of Bus E broken in the harness high
- Connector not fully latched, contacts lifting medium
- Terminal backed out of its housing low
Symptoms
- Modules beyond the break unreachable
- Sporadic message errors among the remaining modules
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0069
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.