U0060
Vehicle Communication Bus D (-) Open
U0060 stands for a break in the (-) line of Vehicle Communication Bus D, CAN-Low on a two-wire CAN such as Bentley's private chassis network. Nodes cut off by the break still see CAN-High move, but a high-speed receiver judges only the voltage difference between both wires, so frames from the other side become unreadable to them. NXP notes that a high-speed transceiver has no way to detect a line interruption itself, which leaves time-outs and missing acknowledgements as the evidence. NXP also designed the wake-up detection of its TJA1041 so that a CAN-Low interruption causes no unwanted wake-up while the bus goes to sleep. No manufacturer documents U0060 publicly. Test CAN-Low continuity between the modules, starting with connectors recently opened.
Possible causes
- (-) wire of Bus D broken in the harness high
- Connector not fully latched after work on the vehicle medium
- Corroded terminal opening the (-) line low
Symptoms
- Functions of modules beyond the break fail
- Lost-communication codes for individual modules on Bus D
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0060
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.