OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0059

Vehicle Communication Bus D (+) High

U0059 means the (+) line of Vehicle Communication Bus D sits at too high a voltage, typically from contact with a battery or 5 V feed. On a high-speed CAN layout the line concerned is CAN-High, and the fault belongs to the shorts NXP calls hidden: communication goes on, and only a transceiver with bus diagnosis can report it. NXP's TJA1041 note mentions a further side effect, namely that the bus wake-up logic of that device was designed so that a CAN-High short to battery does not wake the network while it goes to sleep; a hint that such a short can otherwise interfere with the network going to sleep. Fault-tolerant low-speed hardware like the TJA1055 handles it in two timed steps and ends on CAN-Low alone. No manufacturer documents U0059 publicly. Measured against ground, CAN-High sitting near supply voltage settles the diagnosis.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 59

Possible causes

  • (+) wire of Bus D touching a battery or 5 V feed high
  • Moisture in a connector bridging the bus wire to supply medium
  • Aftermarket device tapped into the bus wire low

Symptoms

  • Usually no symptom, code found during a scan
  • Occasional single warning from a module on Bus D

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0059

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication