U0058
Vehicle Communication Bus D (+) Low
U0058 reports the (+) conductor of Vehicle Communication Bus D shorted to ground. If Bus D is a high-speed-style CAN, that conductor is CAN-High, and NXP's TJA1041 application note puts this short on the list of failures that stop communication completely. A diagnosing transceiver can still flag it, but the note explains why the controller rarely gets that far: when communication is fully corrupted, the routine that would read the flag after a sent frame is never reached. In practice the modules on Bus D drift into bus-off one after another and partners on other networks record them as missing. onsemi measured the node's supply current dropping from about 65 to 50 mA. No manufacturer documents U0058 publicly. With the battery disconnected, CAN-High shows a few ohms or less to ground.
Possible causes
- (+) wire of Bus D chafed through to ground high
- Harness pinched by a bracket or fastener medium
- Shorted transceiver in a module on Bus D low
Symptoms
- All functions on Bus D fail together
- Lost-communication codes in modules on other networks
- Warning lamps or fallback modes depending on the modules involved
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0058
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.