U0057
Vehicle Communication Bus D (+) Open
U0057 indicates an interrupted (+) wire on Vehicle Communication Bus D. Where Bus D is a two-wire CAN, such as the private chassis CAN Bentley files under that name, it is CAN-High. Apart from splitting the bus, a break changes the line itself: Texas Instruments describes high-speed CAN as a 120-ohm twisted pair terminated at both far ends, and warns against placing a terminator inside a node because the line loses it when that node is unplugged. A break that cuts one terminator off leaves part of the wire unterminated, so reflections can distort edges for the remaining nodes. The transceiver cannot detect the interruption itself (NXP). No manufacturer documents U0057 publicly. Look for connectors left open after repairs and conductors fractured where the harness flexes.
Possible causes
- (+) wire of Bus D broken where the harness flexes high
- Connector left unplugged or not latched after a repair medium
- Backed-out or spread terminal medium
Symptoms
- Modules beyond the break unreachable
- Sporadic errors among the remaining modules
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0057
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.