OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0056

Vehicle Communication Bus D Performance

U0056 says Vehicle Communication Bus D works, but its traffic is disturbed. Bentley documents it for the Continental GT (2018-20), GTC (2019-20) and Flying Spur (2020): U005600 with symptom numbers 12689537, 12689541 or 12689542 lands in the chassis control unit (address 0074) or in roll control systems 1 and 2 (00D4, 00D5). Bus D is a private CAN there, and its errors pull in a series of suspension codes; the driver sees a red or yellow suspension lamp and a dynamic ride fault message. Bentley has technicians check the connectors and harness of the three units, then update the chassis control software, or replace the unit if it is on another software level. A production change came with a software update. Elsewhere, loose contacts or a resetting node are the usual causes.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 56

Possible causes

  • Chassis control software level prone to Bus D errors (Bentley) high
  • Loose or dirty connector at a module on Bus D medium
  • Damaged harness between the modules on Bus D medium
  • A module on Bus D restarting because of weak supply low

Symptoms

  • Red or yellow suspension warning lamp (Bentley)
  • Dynamic ride fault message, several suspension codes stored
  • Functions drop out briefly and return

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0056

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication