OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0049

Vehicle Communication Bus C (+) Low

U0049 reports the (+) wire of Vehicle Communication Bus C shorted to ground. If Bus C is a high-speed-type CAN, the affected conductor is CAN-High; for a dominant bit it should climb to roughly 3.6 V, which a grounded line cannot do, and onsemi's tests show the node unable to send anything while its CANH output works into a current limit of up to about 120 mA. Every module on Bus C drops out at the same moment, and members of other networks begin logging missing messages. The fault-tolerant low-speed variant reacts more gracefully, since NXP's TJA1055 counts a grounded CAN-High among the failures that leave ongoing traffic intact. No manufacturer documents U0049 publicly. With the battery disconnected, CAN-High at a few ohms or less to ground confirms the short.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 49

Possible causes

  • (+) wire of Bus C chafed through to ground high
  • Harness pinched during assembly or repair medium
  • Shorted transceiver in a module on Bus C low

Symptoms

  • All functions on Bus C fail together (high-speed type)
  • Missing-message codes in modules on other networks

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0049

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication