U0047
Vehicle Communication Bus C Performance
U0047 says that Vehicle Communication Bus C is up but its traffic is not dependable, for instance through sporadic error frames, messages arriving too late or brief dropouts. CAN controllers keep score with error counters: as onsemi explains with reference to ISO 11898-1, every failed transmission adds eight to the transmit counter, beyond about 128 the node turns error passive and past 255 it takes itself off the bus, rejoining only after 128 runs of eleven recessive bits. A performance code is typically set somewhere along that path, before or between short bus-off episodes. No manufacturer documents U0047 publicly; CARB only requires faults in digital communication to be detected and stored separately. Loose terminals, corroded connectors, interference and a node that resets now and then are the usual causes.
Possible causes
- Loose or corroded terminals on Bus C high
- A module on Bus C resetting because of weak supply or ground medium
- Interference coupled into the bus wiring low
Symptoms
- Functions drop out briefly and return
- Sporadic warning messages from several systems
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0047
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.