OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0044

Vehicle Communication Bus B (-) High

U0044 means the (-) conductor of Vehicle Communication Bus B is held at an excessive voltage, mostly through contact with battery plus. Where Bus B is a high-speed-type CAN, the conductor is CAN-Low, and onsemi found that with CAN-Low at 12 V no frame gets out any more; the node's current even drops, to about 48 mA, because its transmit pin is driven low only some 2 % of the time while the controller retries and backs off. All Bus B members fall silent together. A fault-tolerant low-speed CAN handles the same fault differently: NXP's TJA1055 detects it after a filter delay, turns off the CAN-Low driver and listens on CAN-High only. No manufacturer documents U0044 publicly. Ignition on, CAN-Low against ground near battery voltage confirms it; look for chafing at supply wires and water in connectors.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 44

Possible causes

  • (-) wire chafed against a battery or ignition feed high
  • Water in a connector linking the (-) wire to a supply pin medium
  • Damaged transceiver driving the (-) line high low

Symptoms

  • All functions on Bus B fail together (high-speed type)
  • Lost-communication codes in modules on other networks
  • Fallback modes or warning lamps depending on the modules involved

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0044

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication