U0039
Vehicle Communication Bus B (+) Open
U0039 reports a break in the (+) conductor of Vehicle Communication Bus B, which on a CAN-type network is CAN-High. Deutz assigns this code to the third CAN channel of its EMR L1 engine controller and lists it for main and secondary ECU simply as an open circuit on CAN 3, without naming the wire. On a classic high-speed CAN the interruption stays invisible to the transceiver; NXP notes that even diagnosing transceivers cannot flag a wire break, so the module infers it from partners falling silent. A fault-tolerant low-speed CAN behaves differently: NXP's TJA1055 keeps sending and receiving after a CAN-High break without spoiling frames already on the line. In practice, functions beyond the break drop out while others carry on. Look for unplugged connectors, backed-out pins and breaks near moving parts.
Possible causes
- (+) wire of Bus B broken, often at a flex point high
- Terminal backed out or spread in a connector medium
- Connector left open after repair work medium
Symptoms
- Functions of modules beyond the break unavailable
- Lost-communication codes for individual modules
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0039
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.