OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0031

Vehicle Communication Bus A (+) Low

U0031 indicates a ground short on the (+) conductor of Vehicle Communication Bus A. Where Bus A is a high-speed-style two-wire CAN, such as the sensor/hybrid CAN Audi assigns to this slot in its 48 V mild hybrids, the (+) wire is CAN-High, which has to rise by about a volt to form a dominant bit. Grounded, it cannot: onsemi's measurements list CAN-High to ground among the shorts under which transmission becomes impossible, so the controllers keep retrying in vain. Every node on Bus A then falls silent together, and modules on other networks record lost-communication codes for them. No manufacturer documents U0031 publicly. With the battery disconnected, a few ohms or less between CAN-High and ground locate the short; chafed harness sections are the usual cause.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 31

Possible causes

  • (+) wire chafed through against body ground high
  • Harness trapped under a panel or bracket medium
  • Transceiver of one module shorting the (+) line internally low

Symptoms

  • All functions served by Bus A fail at once
  • Many lost-communication codes in other modules
  • Warning lamps or fallback modes depending on the modules involved

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0031

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication