U0022
Low Speed CAN Communication Bus (+) Low
U0022 indicates a ground short on CAN-High, the positive conductor of a dual-wire low-speed CAN. In the fault-tolerant design of ISO 11898-3, where CAN-High idles at about 0 V and only rises for dominant bits, a ground short simply takes that rise away. NXP's TJA1055 lists CAN-High to ground as failure 5 and keeps transmitting and receiving differentially, since its receiver threshold is chosen so that reception stays correct in this case as well. The network therefore keeps working, and the driver often notices nothing apart from the stored code. On GM's single-wire low-speed GMLAN the (+)/(-) naming does not fit. No manufacturer documents U0022 publicly. With the battery disconnected, a reading near zero ohms from CAN-High to ground confirms the short; trim screws and seat rails are typical culprits.
Possible causes
- CAN-High insulation chafed through against body ground high
- Wire pierced by a trim screw or trapped under a seat rail medium
- Internal transceiver fault pulling CAN-High low low
Symptoms
- Frequently no symptom besides the stored code
- Rare sporadic comfort function faults
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0022
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.