OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0019

Low Speed CAN Communication Bus

U0019 is the general fault slot for the low-speed CAN, the slow body network serving doors, lighting, locks and comfort electronics. Two physical forms exist: the two-wire fault-tolerant CAN of ISO 11898-3, which NXP's TJA1055 runs at up to 125 kBd and keeps alive on one wire after a single break or short, and the one-conductor low-speed GMLAN that GM runs at 33.33 kbit/s. FCA names U0019 CAN B Bus; on the 2015 Ram ProMaster the BCM logged U0019-01 (general electrical failure) with a lit MIL, cured by a BCM reflash under bulletin 08-230-22. Mercedes-Benz lists U001988 among the codes behind false anti-theft alarms in 2019-25 models and has supply, ground and CAN lines to the overhead panel checked. Comfort functions suffer rather than driveability.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 19

Possible causes

  • Damaged low-speed bus wiring or corroded, loose connector pins high
  • Poor supply or ground at a module on the body bus medium
  • Module software logging the code without a real fault (FCA ProMaster BCM) medium
  • Faulty module or transceiver disturbing the low-speed bus low

Symptoms

  • Comfort functions such as locks, lighting or windows fail or act erratically
  • Anti-theft alarm triggers without obvious reason
  • Lost-communication codes for several body modules
  • MIL on in some vehicles (FCA ProMaster 2015)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0019

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication