OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0016

Medium Speed CAN Communication Bus (-) Low

U0016 reports CAN-Low of the medium-speed bus, the (-) wire, sitting below its valid range, typically through a short to ground. Transferred from the high-speed physical layer, which Saab's two-wire terminated mid-speed GMLAN resembles, this is a fault the bus tolerates: onsemi measured continuing transmission with deformed levels, and NXP files it as a hidden failure visible only to transceivers with diagnosis. The comfort network therefore usually keeps working, but becomes more sensitive to interference; drivers rarely notice anything beyond sporadic glitches. No manufacturer documents U0016 publicly. Because the fault hides so well, the code itself is often the only clue; measure CAN-Low against ground with the battery disconnected and follow the harness near sharp edges.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 16

Possible causes

  • Medium-speed CAN-Low chafed against a ground point or sheet edge high
  • Water ingress in a footwell or door connector medium
  • Comfort module transceiver internally shorted on CAN-Low low

Symptoms

  • Usually no lasting malfunction, code found during a scan
  • Sporadic glitches in comfort functions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0016

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication