U0014
Medium Speed CAN Communication Bus (+) High
U0014 means CAN-High of the medium-speed bus lies above its normal range, most often because the (+) wire touches battery voltage. On a differential CAN of the high-speed type this is a fault the network rides through: onsemi and NXP found frames still being delivered, but with shifted levels, reduced noise margin and higher current draw in the transceivers. NXP calls such a short hidden because only transceivers with built-in diagnosis notice it. On the comfort bus the result tends to be subtle: an occasional unresponsive switch, a flickering display or a stored code without complaint. No manufacturer documents U0014 publicly, and Saab's description shows only the two-wire terminated layout that makes this analogy plausible. A CAN-High reading close to battery voltage with ignition on confirms the short.
Possible causes
- Medium-speed CAN-High rubbing against a supply wire high
- Moisture in a door or roof connector linking CAN-High to plus medium
- Aftermarket device wired to the comfort bus incorrectly low
Symptoms
- Occasional unresponsive switches or flickering displays
- Stored code without obvious malfunction
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0014
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.